| 公司名稱 |
工作類別 |
|
瑞健股份有限公司
|
Test Industrialization Engineer
|
|
【Main Responsibilities】
• Establish end-to-end test solutions, from identification of requirements to implementation of test equipment’s
• Drive cross-department projects for new test solutions or continuous improvement of existing test solutions
• Communicate and collaborate with global team members, test equipment vendors and customers
• Conduct technical activities including design review, engineering studies, test method development and validation
• Perform problem solving and root-cause-investigation, including collaboration with designers, simulation, and statisticians
• Build up the center of competencies from testing technologies, and create guidance for knowledge sharing
• Actively participate in standardization and process improvement activities
• Opportunity to work globally at the oversea sites of SHL Medical, including the US, Switzerland and Sweden office
【Required Skills & Qualifications】
• Bachelor’s degree in Mechanical Engineering or similar, ideally combined with 1-3 years of work experiences
• In-depth knowledge of mechanical design and passion for testing technology
• Skilled in structured problem solving, analytical and logical thinking
• Strong organizational and project management skills
• High level of independence, positive and curious attitude
• Familiar with 3D design software (SolidWorks or other CAD) and technical drawings
• Proficient in English (TOEIC 700 or above)
• Project management skills to lead projects according to timelines
|
|
| 公司名稱 |
工作類別 |
|
瑞健股份有限公司
|
Verification/Product Engineer
|
|
As a verification/product engineer, you will participate in the product development project and responsible for the followings:
• Develop engineering test plan in the early phase of product development to provide direction to adjusting the design
• Support realizing design prototype
• Reviewing the product designs and noting likely points of failure.
• Reviewing existing engineering criteria for similar products.
• Meeting with product designers and apply regulatory standards to determine functionality test method
• Develop design verification methodology based on product designs and failure points.
• Conduct the Test Method development and validation activity include fixture development, method validation protocol/report.
• Writing up final test procedures and training QC staff.
• Execute regular equipment maintenance, calibration and status check.
• Assign above job tasks by staffing qualification / personal ability / organization needs.
• Carry out other duties as assigned.
【Required Skills & Qualifications】
• Bachelor’s degree in engineering or science
• Hands-on experience in designing and carrying out tests of mechanical products
• Expertise in fixture design and modal analysis of mechanical test fixtures
• Profound knowledge of mechanical validation testing and data acquisition
• Ability to automate mechanical tests
• Knowledge in metallurgy and data acquisition analysis
• Skilled to perform statistical analysis
• Knowledge of industrial manufacturing procedures
• Proficiency English skill with written and verbal communication is required in an international team and with SHL’s sites overseas. (TOEIC 800 or above)
• Knowledge of Good Laboratory Practice (GLP) and Good Documentation Practices (GDP) is required.
|
|
| 公司名稱 |
工作類別 |
|
瑞健股份有限公司
|
Software Quality Engineer
|
|
【Main Responsibilities】
• Establish software testing plans to deliver quality for medical software intended uses, safety, and security
• Responsible for developing and maintaining software testing pipelines for automatic or manual testing to improve software quality
• Responsible to review software tool validation to ensure the tools used in product development, test and operation processes are fully validated to fulfill intended uses
• Align with customer quality governance model for design & development projects
• Provide guidance to project team members on processes & template requirements, and reviewing software design deliverables
【Required Skills & Qualifications】
• Bachelor's degree or higher in Computer Science or Engineering
• 2+ years in a Software/firmware Development Quality Assurance role
• Fluent in C/C++, or C#, python programming language
• Experienced in building up software system/functional/integration test cases and analyzing architecture/module interaction between software components
• Experienced in development Quality/testing role in medical device industry is a plus
• Knowledge of applicable Medical Device Software Product Lifecycle and QMS standards (EU:MDR, IEC62304, ISO13485, ISO14971, UL2900) is preferred
• Result oriented, Team player, pragmatic & pro-active
• Good at English listening/speaking/reading/writing
|
|
| 公司名稱 |
工作類別 |
|
瑞健股份有限公司
|
Service Desk Engineer
|
|
【Main Responsibilities】
• Act as the first point of contact for users seeking technical assistance over the ITSM ticketing system, phone or email
• Assist users on identifying issues and requests and maintaining the tickets in IT Service Management system within SLAs
• Lead troubleshooting and root cause analysis to effectively resolve issues and deliver sustainable solutions in collaboration with technical peers
• Monitor client infrastructure health and keep track of their availability, performance, and responsiveness
• Support in evaluation and purchasing of IT hardware/software solutions
• Perform IT asset management
• Work closely together with the Information Security organization to enhance and improve security setups for client infrastructures
• Strong organizational qualities to meet tight deadlines as well as coordinate, prioritise and communicate project status to all applicable parties
• Help to grow a healthy, collaborative engineering culture in line with the company values
【Required Skills & Qualifications】
• Bachelor degree, ideally in Computer Science or Information Systems
• 1+ Years of IT related experience in the following technologies:
○ Microsoft Active Directory with Microsoft Azure Active Directory hybrid-join environment
○ Microsoft Windows clients (7, 10, 11)
○ Microsoft Windows Printer Server and any third party certral printer management solutions such as PaperCut
○ Muti-functional printers, office printers and label printers
○ Meeting room technologies (projector, TV, wireless presentation, AV, VC, room reservation terminal and etc)
• Knowledge in Windows client performance analysis, including use of performance monitor or related tools to identify bottlenecks or resource issues
• Knowledge of Windows networking technologies and use of diagnostic tools such as WireShark or Network Monitor to identify communication issues
• Familiar with command lines or PowerShell scripts in automating operational processes
• Experiences on software packaging, distribution technologies, and building OS images via SCCM/Intue are a plus
• Computer certifications are a plus; especially Microsoft Windows or Cisco Networking
• Good verbal and written communication in both English and Chinese are mandatory
• Excellent communicator in a cross-functional team
• A high level of autonomy in combination with a results-driven mindset
• Willing to participate in rotation shifts (08:00 – 20:00 or 20:00 – 08:00)
|
|
| 公司名稱 |
工作類別 |
|
瑞健股份有限公司
|
QA Product Engineer
|
|
【Main Responsibilities】
‧ 領導/參與與專案相關的品質活動，並向團隊提供品質建議。
‧ 必須展現以客戶為導向的態度，跨部門合作技巧以及良好的品質判斷能力。
‧ 在製造過程中對觀察到的不符合項目進行評估和詳細調查。
‧ 向客戶和管理層呈現累積的品質數據。
‧ 利用統計和品質改進工具識別品質數據的趨勢，以預防品質問題再犯。
‧ 能有效地與外國客戶、團隊成員和各種技術專業互動和溝通。
‧ 支援外部品質檢查並執行內部和供應商審核。
‧ 能在時間內主動積極的完成被分配的任務
【Required Skills & Qualifications】
‧ 工程學士學位以上或品質/製成相關工作經驗。
‧ 具有清晰/邏輯思維和良好的組織和溝通能力。
‧ 熟練的解決問題能力。
‧ 熟悉Microsoft Office軟體。
‧ 具有醫療器械行業經驗者優先考慮。
‧ 熟悉法規合規要求：GMP、QSR、和ISO 13485者優先考慮。
‧ 持有CQT（認證品質技術員）、CQE（認證品質工程師）證書者優先加分。
‧ 擁有六標準差綠帶或黑帶證書者優先加分。
|
|
| 公司名稱 |
工作類別 |
|
上洋產業股份有限公司
|
軟體工程師
|
|
1.公司內部系統開發設計
2.產品軟體系統開發設計
3.研究評估新技術與工具
4.優化軟體開發整合系統
5.撰寫技術文件：API、開發相關、新技術評估等
6.協助雲端機房 (Google Cloud Platform) 維運，排除問題
必要條件:
1.下列語言之開發經驗:Java,JSP,Javascript
2.使用關聯式資料庫經驗:MySQL,SQL Server,PostgreSQL
3.Web應用開發經驗
4.熟悉 spring boot/spring mvc 開發架構
5.使用Gradle 經驗
6.使用Git版本控制系統經驗
|
|
| 公司名稱 |
工作類別 |
|
上洋產業股份有限公司
|
商用洗衣維修工程師(台北、新竹、台中、高雄)
|
|
1. 洗衣機、烘衣機之保養、清潔、維修。
2. 投幣式自助洗衣設備保養服務。
3. 尋找長期穩定工作者。
4. 須具備普通小型車駕駛執照 (手動排檔)。
5. 履歷詳列過去工作經驗者優先面試。
|
|
| 公司名稱 |
工作類別 |
|
上洋產業股份有限公司
|
空調家電維修工程師(台北、桃園、新竹、台中、台南、高雄)
|
|
1.進行例行性售後服務（如：客戶拜訪、產品狀況了解及客訴處理）。
2.回覆客戶應用技術的問題，提供產品技術諮詢。
3.提供客戶技術服務，外勤至客戶處安裝、檢修儀器設備。
4.協助業務處理客戶所提出產品相關應用的技術問題，並提供客戶技術支援服務。
5.協助業務人員在產品上的基礎知識訓練，以及提供客戶、工程師在產品使用方面的技術訓練。
6.配合業務與客戶的需求，安裝設備與處理系統問題。
7.負責空調設備的檢修及保養。
8.負責美式洗衣機、冰箱等檢修及保養。
|
|
| 公司名稱 |
工作類別 |
|
上洋產業股份有限公司
|
MIS工程師
|
|
1.負責公司各據點之網路系統建置、管理、維護及障礙排除
2.負責資訊設備與資產管理，包含在軟硬體上之請購、裝設與維護
3.協助使用者啟用各資訊系統
4.協助佈署、管理、維護與測試物聯服務設備
5.管理以上相關之文件與資料
|
|
| 公司名稱 |
工作類別 |
|
上洋產業股份有限公司
|
系統分析師
|
|
工作內容
1.參與資訊系統與產品開發設計
2.依據使用者或流程管理師提出的需求進行分析、系統設計
3.與介接廠商溝通確認規格
4.撰寫需求、分析、與規格文件
5.與團隊、介接廠商進行軟體測試計畫/案例編寫與測試執行和驗證
6.透過資料分析產品使用狀況，持續改進，解決問題
必要條件
1.良好的溝通能力 (理解、表達能力)
2.能透過文件與溝通，了解現有流程與系統，並能將彙整後的資訊製作成規格文件
3.有 WEB-based 系統分析實務經驗，具備 API 設計概念
4.有新系統建置、跨系統整合規劃的經驗
5.熟悉軟體開發流程、專案管理，有使用專案管理系統經驗，如: Redmine, Jira
|
|
